We have an extensive range of accessories at very reasonable prices. They are all top quality . The majority are custom made locally and include all fitting, welding, and painting. All our accessories are multi fit and can be added to any of our trailers. They can also be purchased to suit most other trailers.

We have many other accessories. If you are looking for something in particular not shown here please contact us. We will endeavour to find for you. All prices include GST and exclude freight or postage, please contact us for a quote.

Rear Tailgate kitchen Box manufactured from 1.6 mm steel. Includes 2 x centre latches for locking, full piano hinge, folded door lip with rounded edges, etch primed and painted in hammertone dark charcoal. Includes pump action tap bracket.... $385.00. Fire extinguisher fitted....$38

 Boat Rack Can be manufactured to suit any trailer. The current sizes are Off Road 1860mm x 1565mm, and Light Off Road 1705mm x 1565mm. This is the internal width between each rack front and rear.  Two support bars (cross bars) for additional support or carrying other large items such as bicycles available at an extra $49 each. Boat rack slots into four mounts/sleeves (included in price) one in each corner, each mount has a nut welded into it with a bolt to tighten the boat rack. Mounts/sleeves only can be purchased without the boat rack at $22 each. They can be used to carry shovels etc for beach work. Centre photo shows four crossbars as this customer is attaching a roof rack to the top for additional storage. The rack Also has several tie down points.... $490.00      

Full Boat Rack includes 4 x mounts/sleeves, front and rear rack, and 2 x cross bars .... $588.00   

   Full Boat Rack Used for carrying canoes.... $588.00

   Canoe Rack without crossbars.... $490.00

Stone Guard Manufactured in two different sizes to suit light Off Road and Off Road. These are multi fit and secured with steel plates and bolts. The insert is toughened pvc with a UV protectant. Manufactured with a 7 degree forward pitch.... $385.00

Tregg Poly Coupling Includes vehicle "U" holder for connecting to vehicle. The "U" holder replaces your 50mm towball.... $385.00

Full Range of Hyland Off Road hitches available

Tregg with handbrake....$479.00

Under Body Water Tank (60 ltr) The tank is protected by 2.1mm checker plate guard with angled sides to deflect branches etc. Includes tank filler and Tap in a custom holder. All tank sizes available.... $470.00

Closeup of lockable tank filler and tap for Under body Tank.

Pole holder 1500mm long, 150mm diameter, 4mm pvc pipe, brackets bolted onto to lugs welded to drawbar....$169.

Battery Box with custom aluminium checker plate Surround. Battery box (fitted) includes 12v socket, battery condition indicator, and circuit breaker....$89.00. Aluminium Checker Plate surround including lockable centre latch is ideal for holding the battery box steady, and is ideal in off road situations as battery boxes flex considerably...$120.00

Rear Tow ball Mount ideal to add tow ball for bike rack or to be pulled backwards if bogged down. Includes hole for towball pin and bolt to tighten tongue.... $120.00

Fully welded custom battery box holder. Has over centre latch for securing and locking (black battery box $79)........$120.00

Motorcycle carrier Ramp fits into holder (compact) suitable for vehicle or trailer....$289.00

Giant aluminium tool box (2mm) all Custom made locally. This one has side vents and is designed to carry generator and equipment.... $790.00

Large custom aluminium tool box (fully welded 2mm Australian materials) used for carrying extra fuel or water and equipment, and Includes side vents. Internal compartments can be sized to suit your requirements, for example to suit battery box, small generator etc.... $579.00

Giant lockable Poly Draw bar box (Roto Moulded Polyethylene) Lx1200mm Wx600mm Hx500mm.... $455.00

Large custom aluminium toolbox with battery box holder. We can make toolboxes to your design and specification.... $579

*Rock Tamers* - Removable and adjustable mudflap sysem... $POA

Outboard Motor Mount (version 1without spare wheel holder) Custom made to suit your own outboard, and has steel protector for skeg.... $289.00

Custom Outboard Motor Mounts (versions 2&3). These are designed to incorporate an upright spare wheel holder. Includes welding steel RHS protector below draw bar to protect skeg and propeller if trailer dropped to ground....$289

Electric Brakes. Disc brakes also available particularly if using mag wheels.... $475

Custom Side opening door including compression latch, fitted to Adventurer Off road trailer. Perfect for Drifta slide out storage box. The door is also aligned with the tents internal under bed airflow vents so storage box or goods can be accessed from inside the tent. Door can also be fitted to opposite side, or rear sides of trailer. Can be made in any size required......$POA (Drifta storage box not included)

Complete Heavy duty strut kit includes, 2x 830mm struts, 4x ball ends, 4x nylok nuts, 4x brackets and 2x large overcentre latches. Same struts as used on our trailer range.  .... $89 complete.

Double 100mm x 1500mm long pole holders... $169 the pair fitted.

Reinforced drawbar for serious off-road use. This protects the drawbar from rock damage etc $290

Top quality 80 Watt (2 x 40watt hinged) Mono- crystalline foldable solar panels with zipped carry bag. Comes complete with quality automatic regulator (retail value $1200)… Sale price $799

Product info1 | Product info2

Custom Storm Cover / roof protector covers the complete roof area of both the tent and annex roof, and comes complete with 12 steel buckles ("D"rings) sewn in for guy roping down. It is made from oxford polyester 210D which is top quality, and is used in the manufacture of roof top tents.

The cover enables you to camp under trees without worrying about sap or bird droppings etc, which ultimately may ruin the canvas. the cover can cool down the tent by up to 5 degrees, and will also allow you to be out in a storm. An inexpensive means of protecting your investment. This cover will also fit most similar sized tents on the market, or can be adapted to fit any tents (size 5.5m x 5.00m). Retails $299 or $99 with any purchase of an Austrack tent. This cover is also available at $99 to all Austrack Camper owners.

NEW!!!At last no need to worry about bottoming out in tracks, maneuvering over branches or rocks and spliting your underbody water tank. Quality 85 litre, 5mm thick poly water tank. Size L x 1200mm, W x 200mm, H x 400mm. Complete with 4 x brass threaded inlets/Outlets..$179.

We have designed a custom made tank holder which you can either weld or bolt to a drawbar. The holder secures the tank with two centre latches so it can be quickly removed. It is colour coded and manufactured from 2.1mm steel. The holder fits all size draw bars..$175. Brass tap and extension available additional $20.

OZpig: $285

Take it fishing, camping or use it in your own backyard or patio. The Ozpig is great when entertaining outdoors. Relax and enjoy the warmth of an open fire in safety while you boil the billy and cook up a feast.

The Ozpig is portable, collapsible and easy to transport. When transporting the Ozpig, the legs and chimney will fit into the belly. Weighing approximately 17kgs, the Ozpig comes with a vinyl carry bag.

USES:- BBQ- Use with your camp oven- Heat can be adjusted with the hot plate- Cook with a wok- Boil the billy- Place boiler straight onto the flames- Cook jaffles on slow fire- A must have for any camping or fishing trip

SPECIFICATIONS:- Original design was a 9kg gas bottle converted into a BBQ/Heater. Now manufactured & made of Steel.- Detachable legs, chimney & hot plate for easy cleaning- Galvanised steel legs,screwed in for safety & stability (300mm long)- Chimney comes in 3 parts, each part 300mm in length- 1 warming plate has diameter of 270m- Total weight is approx 16kgs- Comes with multi-purpose tool for removing hot plate & camp oven lid- Includes vinyl carry bag for easy transportation.

OZPIG ACCESSORIES:
Your Ozpig comes with 2 warming plates, one for cooking and the second for warming. You can also purchase a diffuser.
Pivot the top plate away and add the diffuser on top of the flames. You now have the option of two warming areas while cooking on top of the diffuser. The diffuser is excellent for toasting bread & muffins. It can also be placed under your camp oven to reduce the heat (stewing).